- AC/DC Adapters[3]
- Other Power Supplies[5]
- Voltage Regulators/Stabilizers[1]
- Other Welding & Soldering Supplies[2]
- Electric Soldering Irons[1]
- Other Welding Equipment[1]
- Counters[1]
- Multimeters[2]
- Voltage Meters[4]
- Oscilloscopes[10]
- Other Electronic Measuring Instruments[10]
- Signal Generators[10]
- Spectrum Analyzers[10]
- Instrument Parts & Accessories[1]
- Other Measuring & Gauging Tools[1]
- Other Measuring & Analysing Instruments[1]
- Testing Equipment[10]
LCR meter MCH2818
MCH 2818 precision LCR meter
MCH2818 precision LCR meter
Characteristics
240x128 dot-matrix large graphic LCD display
20Hz-200kHz testing frequency, 0.01Hz stepping arbitrary programming
10mVrms-2.0Vrms testing level, 0.01V stepping arbitrary programming
30Ω,100Ω alternative signal source output impedance
Open-circuit, short-circuit, load calibration function
Built-in comparator, 10 selectors sorting and counting function
RS232C, HANDLER interfaces
Introduction
MCH2818 precision LCR meter is an impedance tester with high precision and wide testing range and sixs test resolution. It has high test frequency of 300kHz and 0.01Hz stepping arbitrary programming, and it has 10mV-2V signal level, all making it meet the precision test requirements of production line quality control, in-coming inspection and lab. Its HANDLER, RS232c interfaces are used for the component automatic sorting system, which provides the conditions for computer telecommunication and test recording.
Flexible frequency-response analysis:
Due to non-ideal inductor, capacitor and resistor, in order to precisely evaluate the characteristics of one component in one frequency band, MCH2818A could use its signal generation ability with 10mHz resolution to correctly analyze frequency response of the component parameters in any frequency band. In particular, it can do the precise measuring of the resonant impedance of the low-frequency ceramic resonant devices which has wide impedance range.
Common index
Working temperature, humidity
0-40, ≤90% RH
Power requirements
Voltage
198V-242V
Frequency
47.5Hz-63Hz
Power consumption
≤50VA
Space volume
320mmX140mmX400mm
Weight
About 3.5kg
Technical index
Test functions
Test parameters
Z, C, L, X, B, R, G, D, Q, θ
Basic precision
0.05%
Equivalent circuit
Mathematical function
Serial, parallel
Absolute error, percentage error
Range mode
Automatic, hold
Trigger mode
Internal, manual, outside, bus
Test speed
Slow: 650ms
Middle: 90ms
Fast: 32ms
Calibration function
Open-circuit, short-circuit, load calibration
Test ports
Five ports
Average times
1-255
Display mode
Direct reading, ABS, %, V/I
(voltage/ current test), selector counting
Display
240x 128 dot-matrix graphic LCD display, six digits resolution
Test signal
Test signal frequency
20Hz-200kHz, 0.01Hz stepping arbitrary programming
Test signal level
0.01Vrms-2.0Vrms, 0.01V stepping arbitrary programming
Signal output impedance
30Ω,100Ω alternative
Test display range
Z, R, X
0.00001Ω-99.9999MΩ
C
0.00001pF-999.99mF
L
0.00001μH-9.99999kH
G,B
0.00001μs-999.999s
D
0.00001-9.99999
Q
0.00001-99999.9
θ(DEG)
-179.999°-179.999°
θ(RAD)
-3.14159-3.14159
%
-999.999%-999.999%
Comparator and interface
Comparator
10 selectors, 9 qualified, 1 unqualified. The other one is supplementary.
Interfaces
RS232C, HANDLER